Denbergloss colored polyurethane paint

Denbergloss colored polyurethane paint

Polyurethane high quality top paint uv durable and scratch resist

POLYURETHANE TWO COMPONENT COAT ABRASION RESISTANCE

* FAST DRYING TOP COAT HIGH QUALITY PAINT, UV DURABILITY

Properties:

• Fast drying, ready for recoating after 4-6
• Tough, scratch
• Good adhesion to metal, concrete,
• Can be applied in some layers for thick
• Suitable for walking and car parking
• Washable and repulsive dust &
• UV protection coat
• Scratch preventing coat.

Applications:

• Metal, wood & concrete top
• Wooden floors, parquets.
• Wooden furniture’s.
• Exterior walls.
• Metal buildings and construction top coat.
• Car parking area floor coating.

Polyurethane high quality top paint uv durable and scratch resist

Technical Data:

• Theoretical spreading rate: 1 liter per 12-15 m ²
• Theoretical coverage: 6-7 m2/liter for 150 thickness layer.
• Recommended dry thickness: 75
• Recommended number of layers: 2 ו
• Mixing rate a:b by volume: 2:1 ו
• Density: 9-1.35 gm/cm ³(DIN 51575) ו
• Hardness: >3 Dg (Erichsen) ו
• Elasticity: 1 mm (Sheen) ו
• Viscosity: 2-4 sec (Haake) ו
• Traction resistance: 2 N/mm ² (DIN 53455) ו
• Adherence to  steel:  215 kg/cm² 
• Impact resistance:  8 Dg/mm² 
• Pot life: 4-6 hours at 20°c. ו

Contains:

• Special polyurethane. ו
• Isocyanate hardeners. ו
• Pigments. ו
• Fillers. ו
• Additives. ו

Colors:

• Clear, All colors according cat. RAL or any other. ו

Gloss:

• Glossy, Silky, matte. ו

Touch-drying time:

• 60 minutes. ו

Repainting Gap Time:

• 4-6 hours. ו

Curing time:

• 24 hours. ו

Recommended Application Methods:

• Spray, brush, roller. ו

Polyurethane high quality top paint uv durable and scratch resist

Dilution:

• Spray gun- 25-35% thinner D-11 pressure 4-5. ו
• Brush & airless- 5-10%  D-11, input pressure 5-6 Nozzle – 0.018" output pressure 120-150 atm. ו

Surface Preparation:

• Non-ferrous metals – cleaned-dry, free of When exposed to condensation – surface must be swept. ו
• Suitable primer needed in some surfaces. ו
• Steel – sand blast to Sa-2.5, Swedish standard or sspc s-p 10 USA standard or DIN – 55928 4 German standard. ו
• Concrete – sand blast till the concrete is perfectly clean & the apertures / holes are Also recommended extra cleaning with diluted acid and water high pressure cleaning. (painting allowed 30 days after casting concrete) ו
• Wood – surface must be clean and First coat of isolation will function as primer. After sanding the dry primer it is ready for recoating. ו

Instruction for use:

• Surface preparation as recommended. ו
• Open carefully parts a & b and stir separately. ו
• Pour needed quantity ratio base to hardener 2:1. ו
• Blend well for homogenous mixture and add thinner D-11 as recommended. ו
• Blend again and spray first coat, after 4-6 hours minimum sand a little and spray second layer and ו

צבע פוליאוריתן דנברגלוס אקרילי עליון ו

• למפרט מלא: www.denber-paints.co.il ו
• פרופיל צבעוני דנבר צבעים ו